Filter for Hektor 28/6.3 ...

kgv · 發表於 2014-4-18 16:39:38

Anybody can advice on this?
Apart from using A36 size filter, any other smaller size filter fitting right around the glass can be used?
Thanks!

Dennisony · 發表於 2014-4-18 19:07:23

Should be 34 mm screw-in filter, but I am still using A36.

M3fans · 發表於 2014-4-18 19:37:43

Dennisony 發表於 2014-4-18 19:07
Should be 34 mm screw-in filter, but I am still using A36.

nice to know, thanks for sharing

kgv · 發表於 2014-4-18 19:43:20

Dennisony 發表於 2014-4-18 19:07
Should be 34 mm screw-in filter, but I am still using A36.

If 34mm, that means one still cannot change aperture setting without removing the filter ?

Dennisony · 發表於 2014-4-18 20:13:43

kgv 發表於 2014-4-18 19:43
If 34mm, that means one still cannot change aperture setting without removing the filter ?

The 34mm screw-in filter called FBOOK, there is another option called HOOPY set which allows you to move the aperture nut while the filter has been mounted.

kgv · 發表於 2014-4-18 20:16:35

直頭未見過！
Thanks!

Dennisony · 發表於 2014-4-18 20:19:40

kgv 發表於 2014-4-18 20:16
直頭未見過！
Thanks!

仲有個SOOHN Hood 好Q貴﹗無錢買﹗﹗

kgv · 發表於 2014-4-18 20:24:56

Dennisony 發表於 2014-4-18 20:19
仲有個SOOHN Hood 好Q貴﹗無錢買﹗﹗

This one ?
or
the square one, which I also got one, from a c hing here

kgv · 發表於 2014-4-18 20:25:40

本帖最後由 kgv 於 2014-4-18 20:37 編輯

Dennisony 發表於 2014-4-18 20:13
The 34mm screw-in filter called FBOOK, there is another option called HOOPY set which allows you t ...

Oh, btw, do you know the thread size of HOOPY?
20, or 21 mm?

I tried 19 & 22mm, both not work

Dennisony · 發表於 2014-4-18 20:29:50

Yes, this one! Cost about HK$3000 or above!!

Dennisony · 發表於 2014-4-18 20:30:45

你是Chrome 或 Nickle version??

kgv · 發表於 2014-4-18 20:33:58

Dennisony 發表於 2014-4-18 20:29
Yes, this one! Cost about HK$3000 or above!!

吓 !!!
It just came together with the lens

kgv · 發表於 2014-4-18 20:34:16

本帖最後由 kgv 於 2014-4-18 20:35 編輯

Dennisony 發表於 2014-4-18 20:30
你是Chrome 或 Nickle version??

Chrome ... x2

Nickle 買咗 50 Elmar ... also x2

+ BP hood, very pretty

Dennisony · 發表於 2014-4-18 20:46:58

kgv 發表於 2014-4-18 20:25
Oh, btw, do you know the thread size of HOOPY?
20, or 21 mm?

唔知呀, 我諗住都6.3啦, 仲調乜鬼呀，所以就無揾, 用slip-in filter算嘞.

kgv · 發表於 2014-4-19 22:14:30

but A36 filter
再落 hood
looks very clumpsy

18x24 · 發表於 2014-4-20 02:08:00

本帖最後由 18x24 於 2014-4-20 02:22 編輯

kgv 發表於 2014-4-18 20:25
Oh, btw, do you know the thread size of HOOPY?
20, or 21 mm?

I think it is 18mm.
Leica had produced screw-in mount "Type G" filters to screw on to the retaining ring of the front lens element of 3.5cm & 5cm ELMAR. I am not sure "Type G" would fit 2,8/6.3 Hektor....

kgv · 發表於 2014-4-20 06:46:39

Thanks 18x24 c hing!
I'll try to get one and see

		自動登錄	找回密碼
密碼			立即註冊

Filter for Hektor 28/6.3 ...

本帖子中包含更多資源

本帖子中包含更多資源

本帖子中包含更多資源

點評

本帖子中包含更多資源

點評