救教：抄相時，係 Win 7 遇上 "error x80070037"

ngkh · 發表於 2013-8-5 13:17:21

求敎

近排唔知攪乜鬼，當將 SD / CF 咭嘅 files 經 USB3 抄去 PC 時，經常遇到 "error x80070037"，之後個「抄相操作」亦隨即終止。要拆走個 card reader 再裝過，部機先至認得番張咭，但一抄相，問題又重覆

部機只係砌咗幾個月，win 7、system disk 係 ssd、data 放傳統 hdd。我試過將張 SD/CF 咭同 card reader 放落部 iMac 上用 USB2，一切正常

唔知呢種問題可以點解決呢？

Wohtip · 發表於 2013-8-7 09:39:57

card reader 直插腦既usb定係經usb hub？如果係經hub，可能只係個hub間中唔夠電。如果係直插腦既usb port，可以換第個usb port試下。

factotum · 發表於 2013-8-7 22:04:37

shld be hex addr error 0x80070037.

when did you buy your motherboard.

There was known and reported bug on USB 3.0

Have you applied the latest firmware on your motherboard?

ngkh · 發表於 2013-8-7 23:43:07

本帖最後由 ngkh 於 2013-8-7 23:50 編輯

thanks Wohtip & factotum CHings for the sharing.

card reader is connected to the motherboard directly (not via hub). seems ok when i compromise to use usb2.0

yes, the error code is 0x80070037 precisely
the pc was built in Nov 2012 using asus sabertooth x79 motherboard, and I haven't applied any firmware update yet.

let me try try...

		自動登錄	找回密碼
密碼			立即註冊